To determine whether a patch has been merged to the default branch, we
tally merges based on the default branch quorum: allow set and
threshold. With the introduction of custom branches, the tallying was
not updated to use the quorum rules for the target branch, instead
merging on the identity document threshold and delegate set.
This fix uses the `allow` set and the `threshold` of the most specific
rule that matches the target branch of patch.
Note that a reference that no rule matches never becomes canonical, so a
patch that targets one can never reach a quorum.
Spawning `rad diff` works, but prints a deprecation notice, because
`rad diff` itself is deprecated. `rad patch diff` however is not
deprecated and should just take a shortcut.
Similar to `rad [issue|patch] cache`, this will re-compute cached state
about the identity document. The identity COB does not cache to SQLite,
but there is `refs/rad/id`, which can become stale.
This introduces a `fetch_timeout` setting to the node configuration,
replacing the hardcoded constant. It defines the duration a fetch stream
is allowed to stall before being aborted. The default remains 30s, but
users on anonymizing transports like Tor can now increase it to avoid
spurious timeouts during network congestion.
Introduces support for Gerrit-style magic push references via
`refs/for/<branch>`. Pushing to this ref automatically extracts the
target branch and opens a patch against it, bypassing the need for the
push option `patch.target`. Example:
```
$ git push rad HEAD:refs/for/accepted
```
Will open a patch with its `patch.target` set to `refs/heads/accepted`.
The remote helper now supports the push option `patch.target`. This
allows users to explicitly specify a target canonical reference when
opening or updating a patch. For example, to open a patch that targets
the branch "backport", use:
```
git push -o patch.target=refs/heads/backport
```
Furthermore, strict merge and revert isolation is now enforced:
patches are only marked as merged or reverted if the commits are
pushed to the target branch of the patch explicitly.
Add custom check for ellipses "...", asking for replacement of "…".
Git ranges and the CLI wildcard matches are ignored.
This change includes fixes to all sites that did not pass the check.
When invoked without any of `--patch`, `--delete`, `--accept`,
or `--reject`, the command panicked.
It will now correctly return an error to use `--accept`, `--reject`,
or to supply a message.
Note that `--patch` and `--delete` are removed as these commands are
now obsolete.
The new doc test also documents two previously-untested behaviors
of `rad patch review`: neutral reviews (verdict=None with summary)
and the COB layer's silent no-op when a duplicate review is submitted
(see `test_patch_review_duplicate` in radicle-cli/tests/commands/patch.rs).
Fixes 8ceff5d4b8
Signed-off-by: Arthur Mariano <arthvm@proton.me>
Co-authored-by: Fintan Halpenny <fintan.halpenny@gmail.com>
An edge case was found where a delegate attempted to merge a patch,
but had not pushed to their default branch yet.
This resulted in the `old` not being defined and the check to revert
and/or merge not happening – so the patch continued to appear as open.
Since `old` only matters for the revert and merge check for the
default branch, resolving the `old` side does its best to find a
commit for the checks.
It does this by falling back to getting the canonical head before the
push, and using that as the old.
`cargo check` fails because `human-panic` and `sysinfo` require at least
1.88.0.
+++ command cargo check --release --locked --all-targets
error: rustc 1.85.0 is not supported by the following packages:
human-panic@2.0.6 requires rustc 1.88
sysinfo@0.37.2 requires rustc 1.88
Bump MSRV to fix this.
1.88.0 introduced [let chains], which in turn has `clippy` warn about
nested if statements. All of these sites are fixed in this change.
1.87.0 introduced [`is_multiple_of`], which is a more readable version
of `x % y == 0`.
[let chains]: https://blog.rust-lang.org/2025/06/26/Rust-1.88.0/#let-chains
[`is_multiple_of`]: https://doc.rust-lang.org/std/primitive.usize.html#method.is_multiple_of
Canonical references can not be used to model symbolic references.
Relax this restriction by adding another member to the payload, named
"symbolic". Its key-value/name-target pairs then translate directly to
canonical symbolic references.
Care is taken to not allow circular references, and that there always
is a rule that could generate the target of a symbolic reference
(or a chain of symbolic references). Still, a symbolic reference may
dangle (for example when its target reference cannot be computed
because of divergence), but at least it can be prevented that a
symref *always* dangles, because there is no rule that would produce
its target.
Co-authored-by: Fintan Halpenny <fintan.halpenny@gmail.com>
Previously a rule like `refs/heads/releases-*` would be rewritten
incorrectly to `refs/heads/releases-**/*` matching the 'trailing
asterisk' rule.
Simplify the rewrite rule so that a trailing `*` becomes a prefix
matching rule. Add tests.
- Drop `type='ipv6'` rows whose bracket-stripped inner part contains
no `:`, since every valid IPv6 textual form has at least one
- Cover the offender (`[]:8776`), bracketed garbage (`[abc]:8776`),
the unspecified (`::`), loopback, and full forms in tests
- Keep `dns` and `ipv4` rows untouched
Migration 8 retyped any `[..]:N` dns row to ipv6 by bracket pattern
alone, without checking the inner part is parseable
- Decode each row independently so one corrupt entry no longer aborts
the whole address-book iterator
- Log a warn with the raw `value` and continue past parse failures
- Add a regression test that mimics the post-migration-8 state where a
legacy `[]:8776` row lands as `type='ipv6'`
A pre-`df8e4e6c` parser admitted `[]:8776` as `HostName::Dns("[]")`.
Migration 8 retyped any `[..]:N` dns row to `ipv6` without validating
the inner part, so on read `Address::from_str` rejects the row with
"invalid IPv6 address syntax", which bubbled up and caused
`available_peers()` to silently return empty, breaking peer discovery
for the affected node.
Because we changed our main domain from radicle.xyz to radicle.dev, we
should also change our systemd credential identifiers.
Handling is move into a new function, which also checks the old names
for backwards compatibility.
The main motivation behind this change is to get just a little
telemetry information from nodes on the network, namely the version
of Radicle they are running.
This is achieved by rewriting `impl Default for UserAgent` which now
uses the version information provided by the build script also used
in other crates.
Also, a new configuration option `node.userAgent` is added, which
allows users to override the user agent if they so please, or set
the value `null`, which will in turn send the user agent
`/radicle/`, which is not really helpful, and the default prior to
this commit.
Creations of `UserAgent` in the whole workspace is cleaned up. In
order to do that `UserAgent::test` is introduced.
Each revision now shows a `{base}..{head}` range instead of just the
head. This is meant to clarify when a patch is rebased, and to be
helpful when one might want to observe changes using 'git range-diff'.
Teach the `rad sync` and `rad clone` commands to accept the
`--signed-refs-feature-level` option. This option configures that
fetch to use the minimum feature level provided when fetching from
other nodes. This overrides the value of
`node.fetch.signedReferences.featureLevel.minimum`, and should only be
used in scenarios where it is necessary to downgrade the security of a
fetch for backwards compatibility.
To achieve this, the `Handle::fetch` method introduces an optional
parameter for threading through the `FeatureLevel`.
Add a configuration knob `node.fetch.signedReferences.featureLevel.minimum` to
allow node operators to enforce more strict verification when fetching
Signed References.
In order to allow automatic migration to the feature level 'parent',
introduce a way to force writing signed references, even if the
user-controlled refs are unchanged.
To detect the special case of a Signed References history with a single
and root commit (which would otherwise be detected as feature level
'parent', even though the `refs/rad/sigrefs-parent` ref cannot be
written), keep information about the parent commit in `SignedRefs`.
The output of `rad inspect --sigrefs` is changed to match the more
strict interpretation of the feature level for histories with a single
and root commit.
In order for users to be able to inspect the feature level of Signed
References in a repository, have `rad inspect --sigrefs` attempt to
load Signed References, and, if successful, print the feature level.
To be able to reason about backwards compatibility, downgrade attacks,
and future configurable enforcement of minimum required (security)
features, introduce the concept of a "feature level" in Signed
References.
In this implementation feature levels are assumed to be monotonic, i.e.,
that higher feature levels behave like lower ones, and only add
semantics on top.
Implementing this as an `enum` that is `Ord` flows nicely.
Treatment of the write-side is left for the next commit. Currently,
the write side "promises" `FeatureLevel::Parent`, but is not able
to "keep the promise", since it does not actually inspect the
feature level of the head in case it is unchanged.
CHANGELOG
The scenario A₁ ← B₁ ← A₂ ← B₂ would previously have resulted in A₁
being loaded. This is undesriable, since the latest non-replayed commit
is B₁.
The information regarding the order of duplicates, which is preserved by
`seen`, can be used to recover the first commit.
More sigrefs on the network than previously thought actually are missing
the reference `refs/rad/root`. Revert the change to make this an error,
which was part of commit `d3bc868e84c334f113806df1737f52cc57c5453d`.
IPv6 addresses are already persisted in `config.json` files.
The parsing of these old addresses, e.g. `FE80::0202:B3FF:FE1E:8329:5976` should remain valid.
Emit a warning when they are found.
The output of the address will still enclose the host in `[]`.
Split up signed references into its read and write components.
On the write side:
- Preserve the old behavior of writing references to the blob `/refs`
and sign over the blob.
- Ensure `refs/rad/root` is contained in the `/refs` blob.
- Ensure `refs/rad/sigrefs` is *not* contained in the `/refs` blob.
- Introduce a new (internal) reference `refs/rad/sigrefs-parent`
so that no two `/refs` blob are equal, even if they contain
the same set of (non-internal) refs.
On the read side:
- Preserve the verification of the signature in `/signature` and
the reference `refs/rad/root` (if present).
- Fail verification of `refs/rad/root` is not present.
- Protect against replay attacks by walking the history of the
head of `refs/rad/sigrefs`, skipping interpretation of `/refs`
blobs in case they are identical to a previous `/refs` blob.
This is achieved by searching for repeated contents of the
`/signature` blob.
The reference `refs/rad/sigrefs-parent` is never read from or written to
the Git repository in storage.
The pre-existing implementation of signed references did not include
a nonce, thus duplicate but legitimate sets of references could not
be distinguished from maliciously replayed sets of references.
The new implementation uses `radicle-git-metadata` which is moved from
`dev-dependencies` to `dependencies`.
In issue
29c6c6fc81
was noted that it would be nice to use value parsers for the timeouts in
the CLI.
This patch implements this.
Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Co-Authored-by: Fintan Halpenny <fintan.halpenny@gmail.com>
Configuration of database connections is not performed on `open`, which
leaves room for error (e.g. to miss specifying configuration).
Methods on `Profile` automatically supply the configuration of the
profile.
In testing code, just using the default configuration suffices.
Daniel Norman