Private repos are implemented by extending the identity document with a
`visibility` attribute, that can either be `"public"` (default) or
`"private"`.
In case of `private` visibility, only the delegates are allowed to view
the repo, as well as any DIDs added to the allow list.
To implement repo visibility, we simply block fetches from and
announcements to peers for whom the repo should remain invisible.
Private repos are also not announced in the `inventory` message, since
the full list of peers that *may* have the repo is retrievable from the
repo identity. This could cause errors if eg. a peer who is allowed to
view the repo doesn't actually have it. However this is an ok trade-off
for now to keep the complexity low. For repos to truly be private, it's
important that the RIDs don't leak either.
Finally, we modify `radicle-httpd` for now to only list public repos.
Eventually, we would want to change this depending on whether an allowed
peer is authenticated with the service or not.
---
It's also worth mentioning why this approach was taken, vs. end-to-end
encryption. The reasons are as follows:
1. Nodes that do not have access to a private repo will generally not want to
replicate encrypted data that they cannot examine or use.
2. The chosen solution is trivial, while encrypting git objects isn't.
3. Performance of the chosen solution is much better, there is no
overhead.
4. Privacy of the chosen solution is better: RIDs are never leaked, and
neither is the existence of a private repo, nor who has access to it.
There is one downside: Paying for storage of private repos is no better
in terms of privacy than what GitHub offers. Hosting providers will have
access to your private repos, if this solution is used.
Add `deny.toml` with a few exceptions, and update certain dependencies
to get rid of duplicates.
Running `cargo deny check` will yield some warnings still, but no
errors.
This change allows for files (blobs) to be embedded into COB entries.
This allows for things like image attachments in issue comments for example.
For now, we only enable this in the `issue` COB.
The way it works is that relevant COB actions carry metadata about which
files are attached to them; and we store those files as blobs inside the
COB entry's *tree* object, under an `embeds/` folder.
The `Embed<T>` type is used for the above, and either carries actual
content, or carries a content-id. Retrieving the actual content is as
simple as asking the repository for a blob with that content-id.
As a possible future extension, MIME types could be stored alongside the
files in a "metadata" file. This could help clients display the content
appropriately.
> I'm going to be making a set of breaking changes to COBs in order to
stabilize the data formats. This is hopefully a one-time change that
bundles various breaking changes.
All COBs have been reworked: issue, patch, id.
The changes included are:
* Revise the assign and tag actions to take a single list of
assignees/tags to set, instead of an "add" and a "remove" list. This
makes API usage simpler when editing issues, and simplifies the apply
function
* Rename "tags" to "labels", and the tag action to label. This is
because tag is confusing in the context of git, as it could mean a git
tag. Using label removes that confusion.
* Use DIDs instead of PublicKeys for assignees -- this is more
future-proof
* Modify the manifest file format in the COB tree. Mainly, remove the
`history_type` key which is redundant, and use camelCase for keys
* Flatten the `Thread` actions into the parent action type
* Ensure that operations on redacted objects do not fail, since
redactions could have happened concurrently
* Use a consistent naming scheme for actions, using `.` as separator
* Consolidate comment types and remove `CodeComment`, by adding an
optional `location` field to `Comment`
* Add many placeholder actions that are not yet implemented
To preserve backwards compatibility, a `legacy` module is created with
the old `apply` function. When loading the manifest, we check whether it
is a legacy COB or a "stable" COB, and in the legacy case, use the
legacy code to materialize the state and then convert the object into
the stable type. Eventually, we'll delete the legacy code.
This allows us in the web client to show and let user copy the node id
together with the correct port number
Signed-off-by: Sebastian Martinez <me@sebastinez.dev>
Instead of using strings, use numbers.
*This is a breaking change and affects `config.json` parsing.*
To upgrade, simply unquote any number in your `config.json`.
So we can act upon the eventual parents of a commit, after fetching a
single commit we need to have the parents of that commit as part of the
json payload.
Signed-off-by: Sebastian Martinez <me@sebastinez.dev>
It turns out that the CRDT formed by the union of Git DAGs
is enough to guarantee everything we need for COBs.
This changes the following things:
* COB operations no longer need to be commutative
* COB histories are traversed in the same deterministic order on all
replicas
* It's now possible to implement RSMs on top of COBs, eg. scripting
* Lamport clocks have been removed
* `radicle-crdt` is no longer a dependency of `radicle`
* COBs are no longer instances of `Semilattice`
* The `Ops` type was removed in favor of having `Op` contain multiple
actions
This improves response time of:
- GET /api/v1/projects/<RID>/tree/<OID>/ from 205.71ms down to 376.4µs
- GET /api/v1/projects/<RID>/tree/<OID>/.nix from 111.06ms down to 351.70µs
Signed-off-by: xphoniex <dj.2dixx@gmail.com>
Instead of using always the repo HEAD for the commit count with
`repo::stats` we should use `repo::stats_from` and pass the `parent`
commit.
This way we allow e.g. a commit history for a peer with lesser commits
to be counted correctly.
Signed-off-by: Sebastian Martinez <me@sebastinez.dev>
This is a fairly substantial change, which adds a new configuration file
to the user's `$RAD_HOME` that includes node configuration, including
the alias, and also makes node aliases required.
When running `rad auth`, the user is now prompted for an alias, which
defaults to `$USER`.
When running `rad self`, the alias is now shown.
If the user runs radicle without a config file, the defaults are loaded,
and `$USER` is used as the alias.
This patch incorporates several important changes to code review:
* Code review verdict is no longer editable
* Made reviews redactable instead
* Renamed review top-level comment to "summary"
* Renamed inline comments to "comments"
* Made inline comments addressable by `EntryId`
* This is to allow for editing
* Removed inline comments from review creation
* Added a `CodeComment` action instead
* Removed `Semilattice` instance from `Review`
* Added a `EditReview` action instead to have more control
* Made it valid for revisions to be redacted concurrently with a review/merge
Most of these changes are needed to support proper inline code comments.
* `CodeLocation` had a `blob` and `commit` field. These are redundant,
since the review lives under a revision.
We also change the line range to be diff-compatible, with an old and
new range. The ranges are optional to account for different scenarios
like file deletion, move etc.
* `CodeComment` had redundant getters which were removed in favor of
public fields. We also remove the `timestamp` field, as it will be
the same as the review timestamp.
* Return the correct alias from a node announcement, stripping '\0'
bytes.
* Accept `AliasStore` types as references and as owned.
* Store a `null` in the database if the alias received is empty.
Move `merges` from `Revision` to `Patch`, and key them by actor.
This ensures that only one merge is possible per actor. We also make
sure that only one revision can be merged at a time, and signal a
conflict if more than one revision is considered merged.
Finally, we make sure that merges have the same target-branch commit
to be considered equal.
This change updates to the latest radicle-git-ext, which required a
few changes within the radicle family of crates.
One set of changes is that the radicle-git-ext crate subsumes
git-commit, git-trailers, and git-ref-format -- so all those imports
go through radicle-git-ext.
The commit code requires that parent `Oid`s point to commits, which
made some tests fail. One of the reasons for these failures is that
the patch tests used fabricated `Oid`s and so the verification would
fail. This is fixed by allowing the test context code to create
`PatchRequest`s that create valid commits.
The other reason for failure was that the identity `Action` passed an
`Oid` that pointed to a blob. This is fixed by removing that code and
making a note of it in documentation.
The final major change was moving the Refspec type into git-ref-format
and removing the AsRefspecs trait. The trait was not required and
could its usage could be replaced by simpler code.
Signed-off-by: Fintan Halpenny <fintan.halpenny@gmail.com>
X-Clacks-Overhead: GNU Terry Pratchett
This change ensures that we include as a parent to the initial commit
of a patch COB, the head of the branch we are proposing as a patch.
This was already happening for patch updates, but we forgot to also
include it for the initial patch revision.
This ensures that the code is always fetched alongside the patch.
It wasn't being set correctly, and it's not the place for it,
so we remove it and set it in `httpd`.
Note that `Remote` is now simply a wrapper around `SignedRefs`.
If we want to remove the type or turn it into an alias, it will
require touching lots of different parts of the codebase. I opted
not to do that here as it's lower priority.
This commit adds the cob state of either patches or issues to the
corresponding endpoint.
So we can either query a cob listing with the required state or expect
the default state.
And once filtered by cob state we paginate.
Signed-off-by: Sebastian Martinez <me@sebastinez.dev>
cloudhead